URUAV Flipo F95
Feature 1: LED TailLight
Feature 2: 4S 450mAh Battery
Feature 3: 1106 4500KV 2-4S Motor
Feature 4: NTSC / PAL Video format
Feature 5: 2 1200TVL FPV Camera
Feature 6: Built-in current sensor
Feature 7: GEPR/GEPRCF405 Firmware
URUAV Flipo F95 - Price Comparison
- URUAV Flipo F95 $163.99
Producer URUAV Flipo F95 says with the propellers facing downwards that the UTV UV Flipo F95 gives a brand new cinematographer of pusher suits. You can like also: AuroraRC ManFU24
Design of URUAV Flipo F95
URUAV Flipo F95 measures 9.5 cm diagonal from the engine to engine, creating a carbon build done by propeller guards.
The features that put it at the entrance to the Beta 95XV3 from BTFPV surround this propeller protection by soaking up the shock on the occasion of a touch.
At the center of the plane is a 20AB Leheli_S4-in-1 ESC related GPRC F4 AIO flight controller. The motors are 1106 to 4500 kV brushless for two-inch Zempan D63 three-bladed propellers.
Features of URUAV Flipo F95
The URUAV Flipo F95 is dedicated to an analog video return: the digital camera is combined with a Runcam Nano 2, 1200TVL, a 5.7 GHz analog XF5805 video transmitter suitable for 40 channels with a 25-megawatt compliant power.
But additionally, 100, 300, and 400 megawatts help for settings with smart audio. The antenna is an RHCP polarized attached to the Apex connector. The battery is located in the main part of the system. The UAV offers a 450 mAh 4S lipo with an XT30 connector for four minutes of battery life.
The pre-installed radio receiver is an XM + is URUAV Flipo F95 from Frisky to support a GoPro nad-type digital camera.
Pros and Cons of URUAV Flipo F95
Four LEDs again accomplish the endowment. The set weighs 94.6 grams. Other devices are proposed to have a BTFPV 4K SMO digital camera.
Where to buy URUAV Flipo F95?
You can buy Flipo F95 from online shops like Bangggood, Geekbuying
URUAV Flipo F95 - Full Specifications
Product Details For This Drone
Item Name: URUAV Flipo F95
Brand: Flipo F95
Popular pushed frame design
perfectly for Cinestyle and freestyle
3. Reserved with BB Buzzer Port
With programmable LED Module
Support Caddx Vista HD System
Comes with 3D Printing Parts
Insta360 SMO 4K Camera
CPU: STM32F405 (168MHz)
IMU: MPU6000 (SPI connection)
OSD: Built-in OSD (STM32 controls the OSD chip via SPI)
programmable LED such as WS2812: Support
Built-in current sensor
Reserved buzzer interface
|Dimensions & Weight||
Mounting Hole: 26x26mm
1x Flipo F95 95mm FPV Racing Drone
1x 3D Printing Camera Mount ( for Naked GoPro Camera)
1x 5.8G Antenna
1x Battery Strap